Router's interfaces are different depending on the manufacturer. On Windows 11, you will need to forward the 'TCP' port '3389' on the router to allow remote connections outside the local network. You can contact the internet provider and ask for a static configuration, or you can set up a 'Dynamic Domain Name System' (DDNS) service (such as DynDNS, OpenDNS, No-IP, or for Asus routers), which can track the public IP changes so you can always connect to your network. If you want to avoid connection problems, you have two options. When you subscribe to an internet provider, you would typically receive a dynamic public address as a residential customer, which means that the public IP address may sometimes change. Once you complete the steps, you can use the address to connect remotely.

Confirm the public IP address in the first result.

Quick note: If you have a wireless adapter, click on Wi-Fi, and then click the connection properties option to access the settings.

Click the Ethernet page on the right side.

To set a static IP address on Windows 11, use these steps: If you want to avoid potential connection problems, it's best to set a static IP address on the device to never change the configuration. Typically, a computer receives a dynamic IP address from the DHCP server (the router in the network), which indicates that it can change at any time. In addition, you will also need to determine the public IP address of the remote computer to connect from outside the network.Īlthough setting up a static IP address configuration is not a requirement, it's recommended. You will have to configure the router if you plan to set up a remote session over the internet.

If you have a third-party security solution, you may need to configure the firewall rules manually.

Once you complete the steps, the protocol will enable, and the system will open the required firewall rules to allow connections to the computer. Source: Windows Central (Image credit: Source: Windows Central)

Windows remote desktop management